• High-impedance fault detection (downed conductor detection)
• Multiple phase, ground, neutral and negative sequence instantaneous and timed overcurrent elements
• Phase and negative sequence directional overcurrent, Neutral directional with enhanced polarity criteria, broken conductor and thermal overload
• Load encroachment supervision
• Wattmetric ground fault detection
• Transient ground fault detection (TGFD)
• Incipient cable fault detection
• Four-shot autorecloser with synchronism check
• Breaker control and breaker failure
• Abnormal frequency protection (rate of change, under and over frequency)
• Restricted Ground Fault (RGF)
• Dedicated harmonic/inrush detection

The F60 feeder protection system provides feeder protection, control, monitoring and metering in an integrated, economical, and compact package. As part of the Universal Relay (UR) Family, the F60 features high performance protection, expandable I/O options, integrated monitoring and metering, high-speed communications, and extensive programming and configuration capabilities. The F60 incorporates a unique and matured algorithm to detect high-impedance faults such as downed conductor detection. It also provides fast and deterministic execution of programmable logic necessary for substation automation applications. Graphical programming tools (Viewpoint Engineer), supported by a library of logic components, make the F60 simple to use and configure. The F60 has a wide range of protection elements that have many years of proven field experience.

Functional Block Diagram

ANSI® Device Numbers & Functions

• Metering - current, voltage, power, energy, frequency
• Oscillography – analog and digital parameters at 64 samples/cycle
• Event Recorder - 1024 time tagged events with 0.5ms scan of digital inputs
• Data Logger - 16 channels with sampling rate up to 1 sample / cycle
• Setting for security audit trails for tracking changes to D30 configurations

Monitoring & Diagnostics                               

Advanced Automation

The D30 incorporates advanced automation features including powerful FlexLogic™ programmable logic, communication, and SCADA capabilities that far surpass what is found in the average line protection relay used for subtransmission. The D30 integrates seamlessly with other UR relays for complete system protection.

Complete IEC 61850 Process Bus solution providing resource optimization and minimizing total P & C life cycle costs

• Three independent 100Mbps Ethernet ports enable purpose specific LAN support that eliminates latency effect of heavy traffic protocols on mission critical communication services
• Embedded IEEE 1588 time-synch protocol support eliminates dedicated IRIG-B wiring requirements for IEDs
• Direct I/O secures high-speed exchange of binary data between URs
• Increase network availability by reducing failover time to zero through IEC62439-3 PRP, HSR or dual HSR support

Advanced Communications

The F60 provides advanced communications technologies for remote data and engineering access, making it easy and flexible to use and integrate into new and existing infrastructures. Direct support for fiber optic Ethernet provides high-bandwidth communications allowing for low-latency controls and high-speed file transfers of relay fault and event record information. The available three independent and redundant Ethernet options provide the means to create fault tolerant communication architectures in an easy, cost-effective manner.
The F60 supports the most popular industry standard protocols enabling easy, direct integration into monitoring and SCADA systems.

• IEC 61850-9-2LE/IEC 61869 networked or IEC61850-9-2 Hardfiber process bus support
• DNP 3.0 (serial & TCP/IP)
• IEC 60870-5-103 and IEC 60870-5-104
• Modbus RTU, Modbus TCP/IP
• HTTP, TFTP, SFTP and MMS file transfer
• Redundant SNTP and IEEE 1588 for time synchronization
• PRP as per IEC 62439-3
• Supports Routable GOOSE (R-GOOSE)

Use the F60 with integrated IEC 61850 to lower costs associated with feeder protection, control and automation. GE Vernova’s leadership in IEC 61850 comes from thousands of installed devices and follows on years of development experience with UCA 2.0.

The F60’s IEC 61850 Process Bus module is designed to interface with the Multilin HardFiber System, allowing bi-directional IEC 61850 fiber optic communications. The HardFiber System is designed to integrate seamlessly with existing Universal Relay applications, including protection functions, FlexLogic, metering and communications. 

Learn More

The F60 can also connect to GE Vernova MU320 or third-party merging units using standard IEC 61869 or IEC 61850-9-2LE communication protocols.

Cyber Security - CyberSentry™ UR (FW v7.4xx)

CyberSentry enables UR devices to deliver full cyber security features that help customers to comply with NERC CIP and NITIR 7628 cyber security requirements through supporting the following core features:

Secure FW upgrade

UR FW files v7.9 and up now include a hash code that allows for authentication prior to being used for upgrading UR devices.

Password Complexity

Supporting up to 20 alpha- numeric or special characters, UR passwords exceed NERC CIP requirements for password complexity. Individual passwords per role are available.

AAA Server Support (Radius)

Enables integration with centrally managed authentication and accounting of all user activities and uses modern industry best practices and standards that meet and exceed NERC CIP requirements for authentication and password management.

Role Based Access Control (RBAC)

Efficiently administrate users and roles within UR devices. The new and advanced access functions allow users to configure up to five roles for up to eight configurable users with independent passwords. The standard “Remote Authentication Dial In User Service” (Radius) is used for authentication.

Event Recorder (Syslog for SEM)

Capture all cyber security related events within a SOE element (login, logout, invalid password attempts, remote/local access, user in session, settings change, FW update, etc), and then serve and classify data by security level using standard Syslog data format. This enables UR devices integration with established SEM (Security Event Management) systems.

EnerVista™ Software

The EnerVista™ suite is an industry-leading set of software programs that simplifies every aspect of using the F60 relay. The EnerVista™ suite provides all the tools to monitor the status of the protected asset, maintain the relay, and integrate information measured by the F60 into DCS or SCADA monitoring systems. Convenient COMTRADE and Sequence of Events viewers are an integral part of the UR setup software included with every UR relay, to carry out postmortem event analysis and ensure proper protection system operation. 

Learn More

Transmission and distribution systems are essential for the safe, sure routing of power from generation sources to consumers. However, exposed overhead lines transporting power are by nature sometimes vulnerable and prone to fault. In the case of a faulty circuit, the MiCOM range provides speedy protection to trip and isolate it, thereby preventing further damage. Each relay model contains a complete suite of backup protection elements covering all current, voltage and frequency applications. This permits simplified application and spares holdings, because the relay can be adopted as the standard protection platform. 
The MiCOM P84 is suitable for feeders controlled by a single circuit breaker and for complex installations where feeders are controlled by two circuit breakers such as ring bus/mesh corner formations and the breaker-and-a-half configurations. 

Key Benefits

• Extremely versatile, e.g. managing leader-follower reclosing schemes in the event of dual breaker application
• Multi-shot 1/3pole & 3pole autoreclosure with check synchronism - adaptive technology to detect fault arc extinction and accelerate the dead time or drive to lockout for persistent faults.  Improves system stability whilst reducing OPEX.
• Fast CB failure resetting (<3/4 cycle).
• Same heritage as the class leading MiCOMho P44 and MiCOM P54 family of products.

Main characteristics:

• Comprehensive communication options including IEC 61850 Edition 2
• IEC 61850 redundant Ethernet protocols - RSTP, PRP or HSR
• IEC 61850 9-2LE redundant PRP Process bus protocol
• Advanced Cybersecurity including AAA, Radius, RBAC, and Syslog

MiCOM Multi-Functional Line Terminal Protection 
Buy Now

Key benefits:

• Powerful, free of charge, PC toolsuite
• Optimum management of the installed base, structured as per the substation topology
• Intuitive and versatile interface with file management facilities
• Logical structure based on substation, voltage level and bay
• Version control and cross-checking facilities for IED settings
• Real-time measurement visualization – MiCOM S1 Agile extends to all MiCOM Agile IEDs - including P847 PMU and busbar schemes

Engineering Tool Suite

S1 Agile is the truly universal PC tool for MiCOM Agile relay, assemble all tools in a palette for simple entry, with intuitive navigation via fewer mouse-clicks. No-longer are separate tools required for redundant Ethernet configuration, phasor measurement unit commissioning, busbar scheme operational dashboards, programmable curve profiles or automatic disturbance record extraction – applications are embedded. MiCOM S1 Agile supports all existing MiCOM, K-Series and Modulex, including a utility for automatic conversion of setting files from previous generations of numerical relays like K-series and MiCOM P20 to the latest P40 Agile models.

To move to the future, with no loss of functionality, no loss of device support, and full compatibility with your installed base and system architecture – request a copy of S1 Agile with the contact form link below.

GE Vernova’s latest P84 MiCOM 5th Generation transmission models offer a perfect functional match to our “mho” family of distance relays, from the heritage installed-base brands GE VERNOVA and Areva. The protection pedigree is maintained, optimised and advanced:

MiCOM P841A/B Relay Replacement:

• Form, fit and functional compatibility – the P84 fits in the same panel or rack space and offers the same features and Protection performance.
• The same S1 Agile software supports the new MiCOM relay and the legacy P841A/B

Pin-Pin Upgrade Methodology:

• Take the order code (CORTEC) of the older relay being removed, typically a blue case relay
• Translate to today’s latest GE Vernova MiCOM model, adding Ethernet options if required
• Order the new P40 relay
• Extract settings and logic, use S1 Agile toolsuite to convert settings
• Detach the terminal blocks from old relay, leaving wiring attached / detach terminal blocks from the new.
• Carefully examine the terminal blocks to see that no physical damage has occurred since installation.
• Mount new relay. Old relay blocks fit straight onto the new relay - safer, less wiring to reconnect.
• It is recommended to apply rated current and voltage to the relay CT/VT inputs during secondary injection testing to check the continuity of the CT/VT terminal block connections to the relay.
• Download converted files
• Test, return circuit to service with only minutes of downtime

• Typical operating time of 12 ms with high speed/high break contacts or 17 ms with standard contacts 
• Phase segregated biased current differential high speed busbar protection 
• Easy maintenance, operation and future expansion of the busbar supported
• Deploy in ring-bus/mesh corners, single busbars, sectionalized busbars, and one per bus in breaker and a half topologies

Key benefits:

• Use one box for schemes up to 6 feeders, and 3 boxes (one per phase) for larger schemes up to 18 terminals 
• Interoperable with all classes of CT: IEEE, IEC, air-gapped, non-gapped, and CTs with moderate knee point voltage
• 10 integrated function keys, tri-color LEDs, and graphical programmable logic permit the creation of comprehensive schemes, tailored to your needs 
• IEC 61850 redundant Ethernet with RSTP and IEC 62439 PRP and HSR – with HSR support for up to 50 nodes in a ring

Functional Block Diagram

Key benefits:

• Powerful, free of charge, PC toolsuite
• Optimum management of the installed base, structured as per the substation topology
• Intuitive and versatile interface with file management facilities
• Logical structure based on substation, voltage level and bay
• Version control and cross-checking facilities for IED settings
• Real-time measurement visualization – MiCOM S1 Agile extends to all MiCOM Agile IEDs - including P847 PMU and busbar schemes

Engineering Tool Suite

S1 Agile is the truly universal PC tool for MiCOM Agile relay, assemble all tools in a palette for simple entry, with intuitive navigation via fewer mouse-clicks. No-longer are separate tools required for redundant Ethernet configuration, phasor measurement unit commissioning, busbar scheme operational dashboards, programmable curve profiles or automatic disturbance record extraction – applications are embedded. MiCOM S1 Agile supports all existing MiCOM, K-Series and Modulex, including a utility for automatic conversion of setting files from previous generations of numerical relays like K-series and MiCOM P20 to the latest P40 Agile models.

To move to the future, with no loss of functionality, no loss of device support, and full compatibility with your installed base and system architecture – request a copy of S1 Agile with the contact form link below.

Agile P746 remote PC HMI provides the following features:

• P746 Remote HMI allows the user to display the MiCOM Agile P746 measured analogue quantities and DDB (digital data bus) status information dynamically via the user defined busbar topology
• Available in English, French, German, Spanish, Chinese and Russian

Please use our contact form to request the software.

Refurbishment Solutions – “If It’s Blue Think to Renew”

GE Vernova’s latest MiCOM P746 model offers an ideal path to refurbish an older installed base of MiCOM P746 relays. Whether those older products were initially sold as GE VERNOVA or AREVA-branded products, newer models retain pin-pin refurbishment capability. Advantageously, users can benefit from the advancements made in protection, control, communications, hardware and cybersecurity that have taken place in the intervening years. The new P40 retains form, fit and function compatibility but delivers the latest platform and software ready for today’s environment, and for future-proofed application for the decades ahead.

Pin-Pin Upgrade Methodology:

• Take the order code (CORTEC) of the older relay being removed, typically a blue case relay
• Translate to today’s latest GE Vernova MiCOM model, adding Ethernet options if required
• Order the new P40 relay
• Extract settings and logic, use S1 Agile toolsuite to convert settings
• Detach the terminal blocks from old relay, leaving wiring attached / detach terminal blocks from the new.
• Carefully examine the terminal blocks to see that no physical damage has occurred since installation
• Mount new relay. Old relay blocks fit straight onto the new relay - safer, less wiring to reconnect.
• It is recommended to apply rated current and voltage to the relay CT/VT inputs during secondary injection testing to check the continuity of the CT/VT terminal block connections to the relay.
• Download converted files
• Test, return circuit to service with only minutes of downtime

Contact us for advice and support

• Multi-zone bus differential protection with restrained and unrestrained function
• Fast and reliable CT saturation detection
• Breaker failure protection
• End fault (dead zone) protection
• Check-zone functionality
• CT ratio mismatch compensation
• Dynamic bus replica
• Backup time and instantaneous overcurrent elements
• Undervoltage function for supervision purposess
• Supports Routable GOOSE (R-GOOSE)

The B90 bus differential relay provides fast and secure low-impedance bus protection for reconfigurable LV, HV, and EHV busbars. Use one B90 to protect up to 8 feeders and use three or more B90s together in a centralized phase-segregated architecture to protect up to 24 feeders. Many busbar applications such as single, double, triple, breaker-and-a-half, with or without transfer bus, can be protected using the B90. The B90 relay is ideally suited in applications where high-impedance schemes were typically used. Part of the Universal Relay family, the B90 comes with a variety of versatile features, truly integrating protection, monitoring, metering, communication and control in one easy-to-use device. The Universal Relay family offers a high degree of modularity in its design and functionality, providing superior performance in protection and control, while meeting the toughest requirements of the marketplace.

Functional Block Diagram

ANSI Device Numbers & Functions

• Isolator monitoring (up to 48) and alarming
• CT trouble monitoring
• VT supervision
• Metering - current, voltage, frequency
• Oscillography - 64 samples/cycle, up to 64 records
• Event Recorder - 1024 time tagged events, with 0.5 ms scan of digital inputs
• User configurable fault report

Monitoring & Diagnostic

The B90 incorporates advanced automation features including powerful FlexLogic programmable logic, communication, and SCADA capabilities that far surpass what is found in the average bus protection relay. The B90 integrates seamlessly with other UR relays for complete system protection.

Key Features

• Three independent 100Mbps Ethernet ports enable purpose specific LAN support that eliminates latency effect of heavy traffic protocols on mission critical communication services
• Embedded IEEE 1588 time synch protocol support eliminates dedicated IRIG-B wiring requirements for IEDs
• Direct I/O secures high-speed exchange of binary data between URs
• Increase network availability by reducing failover time to zero through IEC62439-3 "PRP" support

Advanced Communications

The B90 bus protection relay provides for secure remote data and engineering access, making it easy and flexible to use and integrate into new and existing infrastructures. Fiber optic Ethernet provides high-bandwidth communications allowing for low-latency controls and high-speed file transfers of relay fault and event record information. The available three independent and redundant Ethernet options provide the means to create fault tolerant communication architectures in an easy, cost-effective manner.

The B90 relay supports the most popular industry standard protocols enabling easy, direct integration into DCS and SCADA systems.

• IEC 61850 Ed. 1/Ed. 2
• DNP 3.0 (serial & TCP/IP)
• IEC 60870-5-103 and IEC 60870-5-104
• Modbus RTU, Modbus TCP/IP
• HTTP, TFTP, SFTP and MMS file transfer
• Redundant SNTP and IEEE 1588 for time synchronization
• PRP as per IEC 62439-3

Cyber Security - CyberSentry™ UR (FW v7.4xx)

CyberSentry enables UR devices to deliver full cyber security features that help customers to comply with NERC CIP and NITIR 7628 cyber security requirements through supporting the following core features:

Secure FW upgrade

UR FW files v7.9 and up now include a hash code that allows for authentication prior to being used for upgrading UR devices.

Password Complexity

Supporting up to 20 alpha- numeric or special characters, UR passwords exceed NERC CIP requirements for password complexity. Individual passwords per role are available.

AAA Server Support (Radius)

Enables integration with centrally managed authentication and accounting of all user activities and uses modern industry best practices and standards that meet and exceed NERC CIP requirements for authentication and password management.

Role Based Access Control (RBAC)

Efficiently administrate users and roles within UR devices. The new and advanced access functions allow users to configure up to five roles for up to eight configurable users with independent passwords. The standard “Remote Authentication Dial In User Service” (Radius) is used for authentication. 

Event Recorder (Syslog for SEM)

Capture all cyber security related events within a SOE element (login, logout, invalid password attempts, remote/local access, user in session, settings change, FW update, etc), and then serve and classify data by security level using standard Syslog data format. This enables UR devices integration with established SEM (Security Event Management) systems.

EnerVista™ Software

The EnerVista™ suite is an industry-leading set of software programs that simplifies every aspect of using the B90 relay. The EnerVista™ suite provides all the tools to monitor the status of the protected asset, maintain the relay, and integrate information measured by the B90 into DCS or SCADA monitoring systems. Convenient COMTRADE and Sequence of Events viewers are an integral part of the UR setup software included with every UR relay, to carry out postmortem event analysis and ensure proper protection system operation.

Learn More

• Typical operating time of 8ms with high speed/high break contacts, 13ms with standard contacts
• Sensitive earth fault elements improve detection of resistive or arcing faults
• Phase segregated biased current differential high speed busbar protection
• Easy maintenance, operation and future expansion of the busbar supported
• Up to 28 peripheral units supported - scalable busbar solutions from medium to large substations

Key benefits:

• Interoperable with all classes of CT: IEEE, IEC, air-gapped, non-gapped, and CTs with moderate knee point voltage
• True sub-cycle busbar protection - transmission class security and dependability
• High-Availability communications - automatic self-healing on fiber disconnection between central and peripheral units
• IEC 61850 redundant Ethernet with RSTP and IEC 62439 PRP and HSR – with HSR support for up to 50 nodes in a ring

Functional Block Diagram

Key benefits:

• Powerful, free of charge, PC toolsuite
• Optimum management of the installed base, structured as per the substation topology
• Intuitive and versatile interface with file management facilities
• Logical structure based on substation, voltage level and bay
• Version control and cross-checking facilities for IED settings
• Real-time measurement visualization – MiCOM S1 Agile extends to all MiCOM Agile IEDs - including P847 PMU and busbar schemes

Engineering Tool Suite

S1 Agile is the truly universal PC tool for MiCOM Agile relay, assemble all tools in a palette for simple entry, with intuitive navigation via fewer mouse-clicks. No-longer are separate tools required for redundant Ethernet configuration, phasor measurement unit commissioning, busbar scheme operational dashboards, programmable curve profiles or automatic disturbance record extraction – applications are embedded. MiCOM S1 Agile supports all existing MiCOM, K-Series and Modulex, including a utility for automatic conversion of setting files from previous generations of numerical relays like K-series and MiCOM P20 to the latest P40 Agile models.

To move to the future, with no loss of functionality, no loss of device support, and full compatibility with your installed base and system architecture – request a copy of S1 Agile with the contact form link below.

Tool & Remote HMI

MiCOM Agile P74x Busbar Topology Configuration Tool and Remote HMI Tool Features

• Scheme editor: allows the user to define and create a P74x busbar scheme using busbar, CT, circuit breaker and isolator graphical icons
• Synoptic: allows the user to allocate IEDs (P741, P742, P743) to the busbar scheme synoptic.
• Dynamic synoptic: allows the user to display the P74x measured analogue quantities and DDB (digital data bus) status information via the user defined P74x scheme created using the scheme editor in accordance with downloaded embedded configuration of P74x IEDs
• File merge: with this feature the user can automatically create the synoptic settings from above tools into a default setting file of IEDs

Refurbishment Solutions – “If It’s Blue Think to Renew”

GE Vernova’s latest MiCOM P74x series models P741, P742, P743 inclusive offer an ideal path to refurbish an older installed base of MiCOM P74x relays. Whether those older products were initially sold as GE VERNOVA or AREVA-branded products, newer models retain pin-pin refurbishment capability. Advantageously, users can benefit from the advancements made in protection, control, communications, hardware and cybersecurity that have taken place in the intervening years. The new P40 retains form, fit and function compatibility but delivers the latest platform and software ready for today’s environment, and for future-proofed application for the decades ahead.&#xD;

• Take the order code (CORTEC) of the older relay being removed, typically a blue case relay
• Translate to today’s latest GE Vernova MiCOM model, adding Ethernet options if required
• Order the new P40 relay
• Extract settings and logic, use S1 Agile toolsuite to convert settings
• Detach the terminal blocks from old relay, leaving wiring attached / detach terminal blocks from the new.
• Carefully examine the terminal blocks to see that no physical damage has occurred since installation
• Mount new relay. Old relay blocks fit straight onto the new relay - safer, less wiring to reconnect.
• It is recommended to apply rated current and voltage to the relay CT/VT inputs during secondary injection testing to check the continuity of the CT/VT terminal block connections to the relay.
• Download converted files
• Test, return circuit to service with only minutes of downtime

Contact us for advice and support

Key Features

• Phase distance (five zones) with independent compensation settings
• Ground distance (five zones) with independent self and mutual zero-sequence compensation
• Out-of-step tripping and power swing blocking
• Phase and negative sequence directional overcurrent, neutral directional with dual polarity criteria, broken conductor and thermal overload
• Line pickup
• Dedicated harmonic/inrush detection
• Synchronism check
• Four-shot autorecloser
• VT fuse failure detector
• Customize protection and control functions with FlexLogic™, FlexCurves™, and FlexElements™

Protection & Control

The D30 is a cost-effective distance protection relay intended for protecting sub-transmission lines and underground cables of different voltage levels. Part of the Universal Relay family, the D30 comes with a variety of versatile features, truly integrating protection, monitoring, metering, communication and control in one easy-to-use device. The Universal Relay family offers a high degree of modularity in its design and functionality, providing superior performance in protection and control, while meeting the toughest requirements of the marketplace.

Functional Block Diagram

ANSI® Device Numbers & Functions

• Metering - current, voltage, power, energy, frequency
• Oscillography – analog and digital parameters at 64 samples/cycle
• Event Recorder - 1024 time tagged events with 0.5ms scan of digital inputs
• Data Logger - 16 channels with sampling rate up to 1 sample / cycle
• Setting for security audit trails for tracking changes to D30 configurations

The D30 incorporates advanced automation features including powerful FlexLogic™ programmable logic, communication, and SCADA capabilities that far surpass what is found in the average line protection relay used for subtransmission. The D30 integrates seamlessly with other UR relays for complete system protection.

Key Features

Complete IEC 61850 Process Bus solution providing resource optimization and minimizing total P & C life cycle costs

• Three independent 100Mbps Ethernet ports enable purpose specific LAN support that eliminates latency effect of heavy traffic protocols on mission critical communication services
• Embedded IEEE 1588 time-synch protocol support eliminates dedicated IRIG-B wiring requirements for IEDs
• Direct I/O secures high-speed exchange of binary data between URs
• Increase network availability by reducing failover time to zero through IEC62439-3 PRP, HSR or dual HSR support

Advanced Communications

The D30 provides advanced communications technologies for remote data and engineering access, making it easy and flexible to use and integrate into new and existing infrastructures. Direct support for fiber optic Ethernet provides high-bandwidth communications allowing for low-latency controls and high-speed file transfers of relay fault and event record information. The available three independent and redundant Ethernet options provide the means to create fault tolerant communication architectures in an easy, cost-effective manner.

The D30 supports the most popular industry standard protocols enabling easy, direct integration into monitoring and SCADA systems.

• IEC 61850-9-2LE or IEC 61869 point-to-point or networked networked or IEC61850-9-2 Hardfiber
• DNP 3.0 (serial & TCP/IP)
• IEC 60870-5-103 and IEC 60870-5-104
• Modbus RTU, Modbus TCP/IP
• HTTP, TFTP, SFTP and MMS file transfer
• Redundant SNTP and IEEE 1588 for time synchronization
• PRP as per IEC 62439-3
• Supports Routable GOOSE (R-GOOSE)

Use the D30 with integrated IEC 61850 to lower costs associated with distance protection, control and automation. GE Vernova’s leadership in IEC 61850 comes from thousands of installed devices and follows on years of development experience with UCA 2.0.

The D30’s IEC 61850 Process Bus module is designed to interface with the Multilin HardFiber System, allowing bi-directional IEC 61850 fiber optic communications. The HardFiber System is designed to integrate seamlessly with existing Universal Relay applications, including protection functions, FlexLogic, metering and communications. 
Learn More

The B30 can also connect to GE Vernova MU320 or third-party merging units using standard IEC 61869 or IEC 61850-9-2LE communication protocols

Cyber Security - CyberSentry™ UR (FW v7.4xx)

CyberSentry enables UR devices to deliver full cyber security features that help customers to comply with NERC CIP and NITIR 7628 cyber security requirements through supporting the following core features:

Secure FW upgrade

UR FW files v7.9 and up now include a hash code that allows for authentication prior to being used for upgrading UR devices.

Password Complexity

Supporting up to 20 alpha- numeric or special characters, UR passwords exceed NERC CIP requirements for password complexity. Individual passwords per role are available.

AAA Server Support (Radius)

Enables integration with centrally managed authentication and accounting of all user activities and uses modern industry best practices and standards that meet and exceed NERC CIP requirements for authentication and password management.

Role Based Access Control (RBAC)

Efficiently administrate users and roles within UR devices. The new and advanced access functions allow users to configure up to five roles for up to eight configurable users with independent passwords. The standard “Remote Authentication Dial In User Service” (Radius) is used for authentication.

Event Recorder (Syslog for SEM)

Capture all cyber security related events within a SOE element (login, logout, invalid password attempts, remote/local access, user in session, settings change, FW update, etc), and then serve and classify data by security level using standard Syslog data format. This enables UR devices integration with established SEM (Security Event Management) systems.

EnerVista™ Software

The EnerVista™ suite is an industry-leading set of software programs that simplifies every aspect of using the D30 relay. The EnerVista™ suite provides all the tools to monitor the status of the protected asset, maintain the relay, and integrate information measured by the D30 into DCS or SCADA monitoring systems. Convenient COMTRADE and Sequence of Events viewers are an integral part of the UR setup software included with every UR relay, to carry out postmortem event analysis and ensure proper protection system operation. 
Learn More